paricafe/.config/example.yml

#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
# Misskey configuration
#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

#   ┌──────────────────────────────┐
#───┘ a boring but important thing └────────────────────────────

#
# First of all, let me tell you a story that may possibly be
# boring to you and possibly important to you.
#
# Misskey is licensed under the AGPLv3 license. This license is
# known to be often misunderstood.  Please read the following
# instructions carefully and select the appropriate option so
# that you do not negligently cause a license violation.
#

# --------
# Option 1: If you host Misskey AS-IS (without any changes to
#           the source code. forks are not included).
#
# Step 1: Congratulations! You don't need to do anything.

# --------
# Option 2: If you have made changes to the source code (forks
#           are included) and publish a Git repository of source
#           code.  There should be no access restrictions on
#           this repository.  Strictly speaking, it doesn't have
#           to be a Git repository, but you'll probably use Git!
#
# Step 1: Build and run the Misskey server first.
# Step 2: Open <https://your.misskey.example/admin/settings> in
#         your browser with the administrator account.
# Step 3: Enter the URL of your Git repository in the
#         "Repository URL" field.

# --------
# Option 3: If neither of the above applies to you.
#           (In this case, the source code should be published
#           on the Misskey interface.  IT IS NOT ENOUGH TO
#           DISCLOSE THE SOURCE CODE WHEN A USER REQUESTS IT BY
#           E-MAIL OR OTHER MEANS.  If you are not satisfied
#           with this, it is recommended that you read the
#           license again carefully.  Anyway, enabling this
#           option will automatically generate and publish a
#           tarball at build time, protecting you from
#           inadvertent license violations. (There is no legal
#           guarantee, of course.)  The tarball will generated
#           from the root directory of your codebase.  So it is
#           also recommended to check <built/tarball> directory
#           once after building and before activating the server
#           to avoid ACCIDENTAL LEAKING OF SENSITIVE INFORMATION.
#           To prevent certain files from being included in the
#           tarball, add a glob pattern after line 15 in
#           <scripts/tarball.mjs>.  DO NOT FORGET TO BUILD AFTER
#           ENABLING THIS OPTION!)
#
# Step 1: Uncomment the following line.
#
# publishTarballInsteadOfProvideRepositoryUrl: true

#   ┌────────────────────────┐
#───┘ Initial Setup Password └─────────────────────────────────────────────────────

# Password to initiate setting up admin account.
# It will not be used after the initial setup is complete.
#
# Be sure to change this when you set up Misskey via the Internet.
#
# The provider of the service who sets up Misskey on behalf of the customer should
# set this value to something unique when generating the Misskey config file,
# and provide it to the customer.
#
# setupPassword: example_password_please_change_this_or_you_will_get_hacked

#   ┌─────┐
#───┘ URL └─────────────────────────────────────────────────────

# Final accessible URL seen by a user.
url: https://example.tld/

# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
# URL SETTINGS AFTER THAT!

#   ┌───────────────────────┐
#───┘ Port and TLS settings └───────────────────────────────────

#
# Misskey requires a reverse proxy to support HTTPS connections.
#
#                 +----- https://example.tld/ ------------+
#   +------+      |+-------------+      +----------------+|
#   | User | ---> || Proxy (443) | ---> | Misskey (3000) ||
#   +------+      |+-------------+      +----------------+|
#                 +---------------------------------------+
#
#   You need to set up a reverse proxy. (e.g. nginx)
#   An encrypted connection with HTTPS is highly recommended
#   because tokens may be transferred in GET requests.

# The port that your Misskey server should listen on.
port: 3000

# You can also use UNIX domain socket.
# socket: /path/to/misskey.sock
# chmodSocket: '777'

#   ┌──────────────────────────┐
#───┘ PostgreSQL configuration └────────────────────────────────

db:
  host: localhost
  port: 5432

  # Database name
  db: misskey

  # Auth
  user: example-misskey-user
  pass: example-misskey-pass

  # Whether disable Caching queries
  #disableCache: true

  # Extra Connection options
  #extra:
  #  ssl: true

dbReplications: false

# You can configure any number of replicas here
#dbSlaves:
#  -
#    host:
#    port:
#    db:
#    user:
#    pass:
#  -
#    host:
#    port:
#    db:
#    user:
#    pass:

#   ┌─────────────────────┐
#───┘ Redis configuration └─────────────────────────────────────

redis:
  host: localhost
  port: 6379
  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
  #pass: example-pass
  #prefix: example-prefix
  #db: 1
  # You can specify more ioredis options...
  #username: example-username

#redisForPubsub:
#  host: localhost
#  port: 6379
#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
#  #pass: example-pass
#  #prefix: example-prefix
#  #db: 1
#  # You can specify more ioredis options...
#  #username: example-username

#redisForJobQueue:
#  host: localhost
#  port: 6379
#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
#  #pass: example-pass
#  #prefix: example-prefix
#  #db: 1
#  # You can specify more ioredis options...
#  #username: example-username

#redisForTimelines:
#  host: localhost
#  port: 6379
#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
#  #pass: example-pass
#  #prefix: example-prefix
#  #db: 1
#  # You can specify more ioredis options...
#  #username: example-username

#redisForReactions:
#  host: localhost
#  port: 6379
#  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
#  #pass: example-pass
#  #prefix: example-prefix
#  #db: 1
#  # You can specify more ioredis options...
#  #username: example-username

#   ┌───────────────────────────┐
#───┘ MeiliSearch configuration └─────────────────────────────

# You can set scope to local (default value) or global
# (include notes from remote).

#meilisearch:
#  host: localhost
#  port: 7700
#  apiKey: ''
#  ssl: true
#  index: ''
#  scope: local

#   ┌───────────────┐
#───┘ ID generation └───────────────────────────────────────────

# You can select the ID generation method.
# You don't usually need to change this setting, but you can
# change it according to your preferences.

# Available methods:
# aid ... Short, Millisecond accuracy
# aidx ... Millisecond accuracy
# meid ... Similar to ObjectID, Millisecond accuracy
# ulid ... Millisecond accuracy
# objectid ... This is left for backward compatibility

# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
# ID SETTINGS AFTER THAT!

id: 'aidx'

#   ┌────────────────┐
#───┘ Error tracking └──────────────────────────────────────────

# Sentry is available for error tracking.
# See the Sentry documentation for more details on options.

#sentryForBackend:
#  enableNodeProfiling: true
#  options:
#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'

#sentryForFrontend:
#  options:
#    dsn: 'https://examplePublicKey@o0.ingest.sentry.io/0'

#   ┌─────────────────────┐
#───┘ Other configuration └─────────────────────────────────────

# Whether disable HSTS
#disableHsts: true

# Number of worker processes
#clusterLimit: 1

# Job concurrency per worker
#deliverJobConcurrency: 128
#inboxJobConcurrency: 16
#relationshipJobConcurrency: 16
# What's relationshipJob?:
#  Follow, unfollow, block and unblock(ings) while following-imports, etc. or account migrations.

# Job rate limiter
#deliverJobPerSec: 128
#inboxJobPerSec: 32
#relationshipJobPerSec: 64

# Job attempts
#deliverJobMaxAttempts: 12
#inboxJobMaxAttempts: 8

# Local address used for outgoing requests
#outgoingAddress: 127.0.0.1

# IP address family used for outgoing request (ipv4, ipv6 or dual)
#outgoingAddressFamily: ipv4

# Proxy for HTTP/HTTPS
#proxy: http://127.0.0.1:3128

proxyBypassHosts:
  - api.deepl.com
  - api-free.deepl.com
  - www.recaptcha.net
  - hcaptcha.com
  - challenges.cloudflare.com

# Proxy for SMTP/SMTPS
#proxySmtp: http://127.0.0.1:3128   # use HTTP/1.1 CONNECT
#proxySmtp: socks4://127.0.0.1:1080 # use SOCKS4
#proxySmtp: socks5://127.0.0.1:1080 # use SOCKS5

# Media Proxy
# Reference Implementation: https://github.com/misskey-dev/media-proxy
# * Deliver a common cache between instances
# * Perform image compression (on a different server resource than the main process)
#mediaProxy: https://example.com/proxy

# Proxy remote files (default: true)
# Proxy remote files by this instance or mediaProxy to prevent remote files from running in remote domains.
proxyRemoteFiles: true

# Movie Thumbnail Generation URL
# There is no reference implementation.
# For example, Misskey will point to the following URL:
#   https://example.com/thumbnail.webp?thumbnail=1&url=https%3A%2F%2Fstorage.example.com%2Fpath%2Fto%2Fvideo.mp4
#videoThumbnailGenerator: https://example.com

# Sign to ActivityPub GET request (default: true)
signToActivityPubGet: true

# For security reasons, uploading attachments from the intranet is prohibited,
# but exceptions can be made from the following settings. Default value is "undefined".
# Read changelog to learn more (Improvements of 12.90.0 (2021/09/04)).
#allowedPrivateNetworks: [
#  '127.0.0.1/32'
#]

# Upload or download file size limits (bytes)
#maxFileSize: 262144000

# PID File of master process
#pidFile: /tmp/misskey.pid