act/pkg/runner/step_test.go

345 lines
9.3 KiB
Go
Raw Normal View History

feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
package runner
import (
"context"
"testing"
"github.com/nektos/act/pkg/common"
"github.com/nektos/act/pkg/model"
log "github.com/sirupsen/logrus"
"github.com/stretchr/testify/assert"
"github.com/stretchr/testify/mock"
yaml "gopkg.in/yaml.v3"
)
func TestMergeIntoMap(t *testing.T) {
table := []struct {
name string
target map[string]string
maps []map[string]string
expected map[string]string
}{
{
name: "testEmptyMap",
target: map[string]string{},
maps: []map[string]string{},
expected: map[string]string{},
},
{
name: "testMergeIntoEmptyMap",
target: map[string]string{},
maps: []map[string]string{
{
"key1": "value1",
"key2": "value2",
}, {
"key2": "overridden",
"key3": "value3",
},
},
expected: map[string]string{
"key1": "value1",
"key2": "overridden",
"key3": "value3",
},
},
{
name: "testMergeIntoExistingMap",
target: map[string]string{
"key1": "value1",
"key2": "value2",
},
maps: []map[string]string{
{
"key1": "overridden",
},
},
expected: map[string]string{
"key1": "overridden",
"key2": "value2",
},
},
}
for _, tt := range table {
t.Run(tt.name, func(t *testing.T) {
mergeIntoMap(&tt.target, tt.maps...)
assert.Equal(t, tt.expected, tt.target)
})
}
}
type stepMock struct {
mock.Mock
step
}
func (sm *stepMock) pre() common.Executor {
args := sm.Called()
return args.Get(0).(func(context.Context) error)
}
func (sm *stepMock) main() common.Executor {
args := sm.Called()
return args.Get(0).(func(context.Context) error)
}
func (sm *stepMock) post() common.Executor {
args := sm.Called()
return args.Get(0).(func(context.Context) error)
}
func (sm *stepMock) getRunContext() *RunContext {
args := sm.Called()
return args.Get(0).(*RunContext)
}
func (sm *stepMock) getGithubContext(ctx context.Context) *model.GithubContext {
args := sm.Called()
return args.Get(0).(*RunContext).getGithubContext(ctx)
}
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
func (sm *stepMock) getStepModel() *model.Step {
args := sm.Called()
return args.Get(0).(*model.Step)
}
func (sm *stepMock) getEnv() *map[string]string {
args := sm.Called()
return args.Get(0).(*map[string]string)
}
func TestSetupEnv(t *testing.T) {
cm := &containerMock{}
sm := &stepMock{}
rc := &RunContext{
Config: &Config{
Env: map[string]string{
"GITHUB_RUN_ID": "runId",
},
},
Run: &model.Run{
JobID: "1",
Workflow: &model.Workflow{
Jobs: map[string]*model.Job{
"1": {
Env: yaml.Node{
Value: "JOB_KEY: jobvalue",
},
},
},
},
},
Env: map[string]string{
"RC_KEY": "rcvalue",
},
JobContainer: cm,
}
step := &model.Step{
With: map[string]string{
"STEP_WITH": "with-value",
},
}
env := map[string]string{}
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
sm.On("getRunContext").Return(rc)
sm.On("getGithubContext").Return(rc)
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
sm.On("getStepModel").Return(step)
sm.On("getEnv").Return(&env)
err := setupEnv(context.Background(), sm)
assert.Nil(t, err)
// These are commit or system specific
delete((env), "GITHUB_REF")
delete((env), "GITHUB_REF_NAME")
delete((env), "GITHUB_REF_TYPE")
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
delete((env), "GITHUB_SHA")
delete((env), "GITHUB_WORKSPACE")
delete((env), "GITHUB_REPOSITORY")
delete((env), "GITHUB_REPOSITORY_OWNER")
delete((env), "GITHUB_ACTOR")
assert.Equal(t, map[string]string{
"ACT": "true",
"CI": "true",
"GITHUB_ACTION": "",
"GITHUB_ACTIONS": "true",
"GITHUB_ACTION_PATH": "",
"GITHUB_ACTION_REF": "",
"GITHUB_ACTION_REPOSITORY": "",
"GITHUB_API_URL": "https:///api/v3",
"GITHUB_BASE_REF": "",
"GITHUB_EVENT_NAME": "",
"GITHUB_EVENT_PATH": "/var/run/act/workflow/event.json",
"GITHUB_GRAPHQL_URL": "https:///api/graphql",
"GITHUB_HEAD_REF": "",
"GITHUB_JOB": "1",
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
"GITHUB_RETENTION_DAYS": "0",
"GITHUB_RUN_ID": "runId",
"GITHUB_RUN_NUMBER": "1",
"GITHUB_SERVER_URL": "https://",
"GITHUB_TOKEN": "",
"GITHUB_WORKFLOW": "",
"INPUT_STEP_WITH": "with-value",
"RC_KEY": "rcvalue",
"RUNNER_PERFLOG": "/dev/null",
"RUNNER_TRACKING_ID": "",
}, env)
cm.AssertExpectations(t)
}
func TestIsStepEnabled(t *testing.T) {
createTestStep := func(t *testing.T, input string) step {
var step *model.Step
err := yaml.Unmarshal([]byte(input), &step)
assert.NoError(t, err)
return &stepRun{
RunContext: &RunContext{
Config: &Config{
Workdir: ".",
Platforms: map[string]string{
"ubuntu-latest": "ubuntu-latest",
},
},
StepResults: map[string]*model.StepResult{},
Env: map[string]string{},
Run: &model.Run{
JobID: "job1",
Workflow: &model.Workflow{
Name: "workflow1",
Jobs: map[string]*model.Job{
"job1": createJob(t, `runs-on: ubuntu-latest`, ""),
},
},
},
},
Step: step,
}
}
log.SetLevel(log.DebugLevel)
assertObject := assert.New(t)
// success()
step := createTestStep(t, "if: success()")
assertObject.True(isStepEnabled(context.Background(), step.getIfExpression(context.Background(), stepStageMain), step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
step = createTestStep(t, "if: success()")
step.getRunContext().StepResults["a"] = &model.StepResult{
Conclusion: model.StepStatusSuccess,
}
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.True(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
step = createTestStep(t, "if: success()")
step.getRunContext().StepResults["a"] = &model.StepResult{
Conclusion: model.StepStatusFailure,
}
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.False(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
// failure()
step = createTestStep(t, "if: failure()")
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.False(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
step = createTestStep(t, "if: failure()")
step.getRunContext().StepResults["a"] = &model.StepResult{
Conclusion: model.StepStatusSuccess,
}
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.False(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
step = createTestStep(t, "if: failure()")
step.getRunContext().StepResults["a"] = &model.StepResult{
Conclusion: model.StepStatusFailure,
}
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.True(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
// always()
step = createTestStep(t, "if: always()")
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.True(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
step = createTestStep(t, "if: always()")
step.getRunContext().StepResults["a"] = &model.StepResult{
Conclusion: model.StepStatusSuccess,
}
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.True(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
step = createTestStep(t, "if: always()")
step.getRunContext().StepResults["a"] = &model.StepResult{
Conclusion: model.StepStatusFailure,
}
implement pre and post steps (#1089) * feat: add post step to actions and add state command This commit includes requried changes for running post steps for local and remote actions. This allows general cleanup work to be done after executing an action. Communication is allowed between this steps, by using the action state. * feat: collect pre and post steps for composite actions * refactor: move composite action logic into own file * refactor: restructure composite handling * feat: run composite post steps during post step lifecycle * refactor: remove duplicate log output * feat: run all composite post actions in a step Since composite actions could have multiple pre/post steps inside, we need to run all of them in a single top-level pre/post step. This PR includes a test case for this and the correct order of steps to be executed. * refactor: remove unused lines of code * refactor: simplify test expression * fix: use composite job logger * fix: make step output more readable * fix: enforce running all post executor To make sure every post executor/step is executed, it is chained with it's own Finally executor. * fix: do not run post step if no step result is available Having no step result means we do not run any step (neither pre nor main) and we do not need to run post. * fix: setup defaults If no pre-if or post-if is given, it should default to 'always()'. This could be set even if there is no pre or post step. In fact this is required for composite actions and included post steps to run. * fix: output step related if expression * test: update expectation * feat: run pre step from actions (#1110) This PR implements running pre steps for remote actions. This includes remote actions using inside local composite actions. * fix: set correct expr default status checks For post-if conditions the default status check should be always(), while for all other if expression the default status check is success() References: https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functions https://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if * fix: remove code added during rebase
2022-05-24 08:36:06 -05:00
assertObject.True(isStepEnabled(context.Background(), step.getStepModel().If.Value, step, stepStageMain))
feat: split job steps into its own files/structs (#1004) * refactor: split step_context into separate files This commit moves functions from the step_context.go file into different files, but does otherwise not change anything. This is done to make it easier to review the changes made to these functions in the next commit, where we introduce a step factory to facilitate better unit testing of steps. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * refactor: introduce step factory and make steps testable With this commit we're introducing the `stepFactory` and interfaces and implementations for each different kind of step (run, docker, local and remote actions). Separating each step kind into its own interface and implementation makes it easier to reason about and to change behaviour of the step. By introducing interfaces we enable better unit testability as now each step implementation, the step factory and the job executor can be tested on their own by mocking out parts that are irrelevant. This commits prepares us for implementing pre/post actions in a later PR. Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> * fix: run post steps in reverse order * test: add missing asserts for mocks * refactor: use local reference instead of function This may make code more easy to follow. * refactor: correct typo in function name * test: use named structs * test: only expected valid calls There are mocks which are only called on certain conditions. * refactor: use step-model to get step name Using the step-logger we have to get the logger name from the step model. * test: only mock stopContainer if required Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se> Co-authored-by: Marcus Noll <marcus.noll@new-work.se> Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se> Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se> Co-authored-by: Jonas Holland <jonas.holland@new-work.se> Co-authored-by: Casey Lee <cplee@nektos.com> Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
2022-03-22 16:13:00 -05:00
}
func TestIsContinueOnError(t *testing.T) {
createTestStep := func(t *testing.T, input string) step {
var step *model.Step
err := yaml.Unmarshal([]byte(input), &step)
assert.NoError(t, err)
return &stepRun{
RunContext: &RunContext{
Config: &Config{
Workdir: ".",
Platforms: map[string]string{
"ubuntu-latest": "ubuntu-latest",
},
},
StepResults: map[string]*model.StepResult{},
Env: map[string]string{},
Run: &model.Run{
JobID: "job1",
Workflow: &model.Workflow{
Name: "workflow1",
Jobs: map[string]*model.Job{
"job1": createJob(t, `runs-on: ubuntu-latest`, ""),
},
},
},
},
Step: step,
}
}
log.SetLevel(log.DebugLevel)
assertObject := assert.New(t)
// absent
step := createTestStep(t, "name: test")
continueOnError, err := isContinueOnError(context.Background(), step.getStepModel().RawContinueOnError, step, stepStageMain)
assertObject.False(continueOnError)
assertObject.Nil(err)
// explcit true
step = createTestStep(t, "continue-on-error: true")
continueOnError, err = isContinueOnError(context.Background(), step.getStepModel().RawContinueOnError, step, stepStageMain)
assertObject.True(continueOnError)
assertObject.Nil(err)
// explicit false
step = createTestStep(t, "continue-on-error: false")
continueOnError, err = isContinueOnError(context.Background(), step.getStepModel().RawContinueOnError, step, stepStageMain)
assertObject.False(continueOnError)
assertObject.Nil(err)
// expression true
step = createTestStep(t, "continue-on-error: ${{ 'test' == 'test' }}")
continueOnError, err = isContinueOnError(context.Background(), step.getStepModel().RawContinueOnError, step, stepStageMain)
assertObject.True(continueOnError)
assertObject.Nil(err)
// expression false
step = createTestStep(t, "continue-on-error: ${{ 'test' != 'test' }}")
continueOnError, err = isContinueOnError(context.Background(), step.getStepModel().RawContinueOnError, step, stepStageMain)
assertObject.False(continueOnError)
assertObject.Nil(err)
// expression parse error
step = createTestStep(t, "continue-on-error: ${{ 'test' != test }}")
continueOnError, err = isContinueOnError(context.Background(), step.getStepModel().RawContinueOnError, step, stepStageMain)
assertObject.False(continueOnError)
assertObject.NotNil(err)
}