* fix: fail if no stages were found
Adds a warning message if act is cannot find any stages to run
with the filters provided.
Reproduction:
- run `act -j gibberish`
Desired behavior: some indication I did something silly
Actual behavior: no output, just exit with success.
As a human who often makes spelling mistakes,
it would be nice if act warned me what I was doing that was silly
rather than exiting apparently doing
nothing with no obvious indication
I did something wrong.
* Revert "fix: fail if no stages were found"
This reverts commit 226adf1c15cf4c01d516a05dc923507e6999978d.
* fix: fail if no stages were found
Errors if no stages were found with the given filters.
Prints out a helpful error message, pointing users
in the right place for how to specify which stage to run.
Reproduction:
- run `act -j gibberish`
Desired behavior: some indication I did something silly
Actual behavior: no output, just exit with success.
As a human who often makes spelling mistakes,
it would be nice if act warned me what I was doing that was silly
rather than exiting apparently doing
nothing with no obvious indication
I did something wrong.
The `--device` option would do platform-dependent validation, but the
OS was not passed as an argument. When a user added the `--device` option
to the container, it would result in a "Unknown server OS" error.
From the Go docs:
"For a nil slice, the number of iterations is 0" [1]
Therefore, an additional nil check for `job.RunsOn()` before the loop is
unnecessary because `job.RunsOn()` returns a `[]string`.
[1]: https://go.dev/ref/spec#For_range
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* feat: CopyTarStream
Prepare for new process and thread safe action cache
* fix unused param
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* prefer pwsh on windows if found
prefer bash over sh if found
One windows test no longer defines a default shell to test if it's pwsh
* add dep
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Since actions can specify the download source via a url prefix. The prefix may contain some sensitive information that needs to be stored in secrets or variable context, so we need to interpolate the expression value for`uses` firstly.
Reviewed-on: https://gitea.com/gitea/act/pulls/75
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
* updates to support newer version of docker sdk
Bumps [github.com/docker/cli](https://github.com/docker/cli) from 24.0.2+incompatible to 24.0.4+incompatible.
- [Commits](https://github.com/docker/cli/compare/v24.0.2...v24.0.4)
---
updated-dependencies:
- dependency-name: github.com/docker/cli
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com>
* feat: upgrade to go 1.20
* feat: upgrade to go 1.20
* chore: use go version from go.mod
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* throw if `uses` is invalid
* update JobType to return error
* lint
* put //nolint:dupl on wrong test
* update error message to remove end punctuation
* lint
* update remote job type check
* move if statement
* rm nolint:dupl ... we'll see how that goes
---------
Co-authored-by: Casey Lee <cplee@nektos.com>
1. Newest act is not able to clone action based on --default-actions-url
It might be side effect of https://gitea.com/gitea/act/pulls/67.
2. Set correct server_url, api_url, graphql_url for act_runner exec
Reviewed-on: https://gitea.com/gitea/act/pulls/68
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Tomasz Duda <tomaszduda23@gmail.com>
Co-committed-by: Tomasz Duda <tomaszduda23@gmail.com>
Adds an explicit config option to specify the directory
below which action contents will be cached. If left empty
the previous location at `$XDG_CACHE_HOME/act` or
`$HOME/.cache/act` will be used respectively.
Required to resolvegitea/act_runner#235
Co-authored-by: Marius Zwicker <marius@mlba-team.de>
Reviewed-on: https://gitea.com/gitea/act/pulls/65
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Marius Zwicker <emzeat@noreply.gitea.com>
Co-committed-by: Marius Zwicker <emzeat@noreply.gitea.com>
Adds an option to specify the directory below which actions
and host workspaces will be stored. If left empty the previous
location at $XDG_CACHE_HOME/act or $HOME/.cache/act will be used
respectively.
Co-authored-by: Casey Lee <cplee@nektos.com>
by the way, export `ACT_SKIP_CHECKOUT` as a env verb for user to do some special config of local test.
example usage:
7a3ab0fdbc
Reviewed-on: https://gitea.com/gitea/act/pulls/63
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-committed-by: a1012112796 <1012112796@qq.com>
Because the upstream [PR](https://github.com/nektos/act/pull/1833) already supports variables, so this PR revert #43 (commit de529139af), and cherry-pick commit [6ce45e3](6ce45e3f24).
Co-authored-by: Kuan Yong <wong0514@gmail.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/66
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
* feature: Add support for github action variables
* add --var flag for github variables
* unitests: Updated unittests to cover vars context.
* Remove syntax extension for vars and correct unit tests
* Update pkg/runner/expression.go
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
---------
Co-authored-by: kuanyong-wong-partior <kuanyong.wong@partior.com>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
* Log incoming jobs.
Log the full contents of the job protobuf to make debugging jobs easier
* Ensure that the parallel executor always uses at least one thread.
The caller may mis-calculate the number of CPUs as zero, in which case
ensure that at least one thread is spawned.
* Use runtime.NumCPU for CPU counts.
For hosts without docker, GetHostInfo() returns a blank struct which
has zero CPUs and causes downstream trouble.
---------
Co-authored-by: Paul Armstrong <psa@users.noreply.gitea.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Related: https://gitea.com/gitea/act_runner/issues/189#issuecomment-740636
Refer to [Docker Doc](https://docs.docker.com/engine/reference/commandline/run/#volumes-from), the `--volumes-from` flag is used when running or creating a new container and takes the name or ID of the container from which you want to share volumes. Here's the syntax:
```
docker run --volumes-from <container_name_or_id> <image>
```
So put the job container name into the `env` context in this PR.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/62
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
Follow: https://gitea.com/gitea/act_runner/pulls/184
Close https://gitea.com/gitea/act_runner/issues/177
#### changes:
- `act` create new networks only if the value of `NeedCreateNetwork` is true, and remove these networks at last. `NeedCreateNetwork` is passed by `act_runner`. 'NeedCreateNetwork' is true only if `container.network` in the configuration file of the `act_runner` is empty.
- In the `docker create` phase, specify the network to which containers will connect. Because, if not specify , container will connect to `bridge` network which is created automatically by Docker.
- If the network is user defined network ( the value of `container.network` is empty or `<custom-network>`. Because, the network created by `act` is also user defined network.), will also specify alias by `--network-alias`. The alias of service is `<service-id>`. So we can be access service container by `<service-id>:<port>` in the steps of job.
- Won't try to `docker network connect ` network after `docker start` any more.
- Because on the one hand, `docker network connect` applies only to user defined networks, if try to `docker network connect host <container-name>` will return error.
- On the other hand, we just specify network in the stage of `docker create`, the same effect can be achieved.
- Won't try to remove containers and networks berfore the stage of `docker start`, because the name of these containers and netwoks won't be repeat.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/56
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
The runner's `privileged` config can be bypassed. Currently, even if the runner's `privileged` config is false, users can still enable the privileged mode by using `--privileged` in the container's option string. Therefore, if runner's config is false, the `--privileged` in options string should be ignored.
Reviewed-on: https://gitea.com/gitea/act/pulls/57
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
In [nektos/act/pull/1739](https://github.com/nektos/act/pull/1739), the container network mode defaults to `host` if the network option isn't specified in `options`. When calling `ConnectToNetwork`, the `host` network mode may cause the error:
`Error response from daemon: container sharing network namespace with another container or host cannot be connected to any other network`
see the code: a94a01bff2/pkg/container/docker_run.go (L51-L68)
To avoid the error, this logic needs to be removed to keep the default network mode as `bridge`.
Reviewed-on: https://gitea.com/gitea/act/pulls/55
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Keep the order of `on` when parsing workflow, and fix the occasional unit test failure of `actions` like https://gitea.com/gitea/act/actions/runs/68
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/46
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
* fix: try finding a socket, otherwise fail, respect user choice
* Update cmd/root.go
Co-authored-by: Jason Song <i@wolfogre.com>
* Update cmd/root.go
Co-authored-by: Jason Song <i@wolfogre.com>
---------
Co-authored-by: Jason Song <i@wolfogre.com>
This PR is to support overwriting the default `CMD` command of `services` containers.
This is a Gitea specific feature and GitHub Actions doesn't support this syntax.
Reviewed-on: https://gitea.com/gitea/act/pulls/50
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Follow #48
Empty steps are invalid, so remove them when decoding `Job` from YAML.
Reviewed-on: https://gitea.com/gitea/act/pulls/49
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
```yml
jobs:
job1:
steps:
- run: echo HelloWorld
- # empty step
```
If a job contains an empty step, `Job.Steps` will have a nil element and will cause panic when calling `Step.String()`.
See [the code of gitea](948a9ee5e8/models/actions/task.go (L300-L301))
Reviewed-on: https://gitea.com/gitea/act/pulls/48
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
related to: https://gitea.com/gitea/act_runner/issues/127
This PR make `act` support the expression like `${{ vars.YOUR_CUSTOM_VARIABLES }}`.
Reviewed-on: https://gitea.com/gitea/act/pulls/43
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
act defaults network mode to "host", but when `--container-options` are
passed on the CLI, it uses the docker CLI options parser, which fills
empty values with defaults, in which case network mode is set to
"default".
Unless the user explicitly sets `--container-options="--network=xxx"`,
we should always default to "host", to keep act's behaviour.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Fix [#24039(GitHub)](https://github.com/go-gitea/gitea/issues/24039)
At present, if a job fails in the `Set up job`, the result status of the job will still be `success`. The reason is that the `pre` steps don't call `SetJobError`, so the `jobError` will be nil when `post` steps setting the job result. See 5c4a96bcb7/pkg/runner/job_executor.go (L99)
Reviewed-on: https://gitea.com/gitea/act/pulls/40
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* fix: add `server_url` attribute to github context
The `server_urL` attribute was missing in the `github` context.
Previously it was exposed as environment variable only.
Closes#1726
* fix: also set `api_url` and `graphql_url` attributes
Partially fixes https://gitea.com/gitea/act_runner/issues/91
If the repository is private, we need to provide the token to the caller workflows to access the called reusable workflows from the same repository.
Reviewed-on: https://gitea.com/gitea/act/pulls/38
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Fix https://gitea.com/gitea/act_runner/issues/80
Fix https://gitea.com/gitea/act_runner/issues/85
To support reusable workflows, I made some improvements:
- read `yml` files from both `.gitea/workflows` and `.github/workflows`
- clone repository for local reusable workflows because the runner doesn't have the code in its local directory
- fix the incorrect clone url like `https://https://gitea.com`
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/34
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Make sure working directory is respected when configured from matrix
* Fix regression by setting Workingdirectory on stepRun instead of step or too early
Keep the order of jobs in the workflow file when parsing, and it will make it possible for Gitea to show jobs in the original order on UI.
Reviewed-on: https://gitea.com/gitea/act/pulls/33
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
And we will be able to use context like `${{ gitea.repository }}` in workflows yaml files, it's same as `${{ github.repository }}`
Reviewed-on: https://gitea.com/gitea/act/pulls/27
Reviewed-by: Zettat123 <zettat123@noreply.gitea.io>
At present, the runner can't run go actions even if the go environment has been set by the `setup-go` action. The reason is that `setup-go` will add the go related paths to [`GITHUB_PATH`](https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions#adding-a-system-path) but in #22 I forgot to apply them before running go actions. After adding the `ApplyExtraPath` function, the `setup-go` action runs properly.
Reviewed-on: https://gitea.com/gitea/act/pulls/26
Reviewed-by: Jason Song <i@wolfogre.com>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
Close#21
I have tested this PR and run Go actions successfully on:
- Windows host
- Docker on Windows
- Linux host
- Docker on Linux
Before running Go actions, we need to make sure that Go has been installed on the host or the Docker image.
Reviewed-on: https://gitea.com/gitea/act/pulls/22
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* fix: correct ref and ref_name
The ref in the GitHub context is always full qualified
(e.g. refs/heads/branch, refs/tags/v1).
The ref_name is the ref with the strippep prefix.
In case of pull_requests, this is the merge commit ref
(e.g. refs/pull/123/merge -> 123/merge).
* test: update test data
