The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
[1]: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* test: check workflow_dispatch inputs
This implements a test to check for `workflow_dispatch` inputs.
This will be a prerequisite for implementing the inputs.
* feat: map workflow_dispatch input to expression evaluator
This changes adds the workflow_dispatch event inputs
to the `inputs` context and maintaining the boolean type
* fix: coerce boolean input types
* fix: use step env if available, rc env otherwise
* test: add test for networking setup in act
This test makes sure that the hostname inside of act is resolvable.
* fix: only merge existing container options
When merging parsed container options without options being
set in a job, the default docker options are returned and
will override the expected defaults by act (e.g. network mode).
This is a first attempt to mitigate this behavior and only
merge settings if something was requested on a job.
* refactor: split config merging into own function
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
The env for remote composite actions need to be re-evaluated
at every stage (pre, main, post) as it is created during the
pre stage but there might be changes used as input to this
actions main stage (e.g. outputs for another action).
This is not required for local actions as their env is created
for the main stage (there is no pre stage).
Post stages do not need an updated env since they cannot recieve
inputs from other actions.
* fix: support docker create arguments from container.options (#1022)
* fix processing of errors, add verbose logging, fix test
* disable linter for code copied from docker/cli
* fix all linter issues
* Add license info
* Add opts_test.go from docker/cli and required testdata
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* test: add test case for #1319
* fix: setup of composite inputs
This change fixes the composite action setup handling of inputs.
All inputs are taken from the env now. The env is composed of
the 'level above'.
For example:
- step env -> taken from run context
- action env -> taken from step env
- composite env -> taken from action env
Before this change the env setup for steps, actions and composite
run contexts was harder to understand as all parts looked into
one of these: parent run context, step, action, composite run context.
Now the 'data flow' is from higher levels to lower levels which should
make it more clean.
Fixes#1319
* test: add simple remote composite action test
Since we don't have a remote composite test at all
before this, we need at least the simplest case.
This does not check every feature, but ensures basic
availability of remote composite actions.
* refactor: move ActionRef and ActionRepository
Moving ActionRef and ActionRepository from RunContext into the
step, allows us to remove the - more or less - ugly copy operations
from the RunContext.
This is more clean, as each step does hold the data required anyway
and the RunContext shouldn't know about the action details.
* refactor: remove unused properties
For log processing of the JSON logs, we want to be able to know which
keys/values of the matrices were used.
This commit adds the current matrix map to the job logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: align github.ref to GitHub Action
The `github.ref` value should be `refs/heads/branch` in most cases.
There are a few exceptions handled by the code.
This change prefixes the default case with `refs/heads` and adds
tests for this and the excpetional cases.
* fix: correct existing assertions
This fixes an issue in the chain of post steps introduced
while updating the step-logger for composite actions.
It includes a test case so we make sure this does not happen
again.
when running nested composite actions, step ids were repeating
leading to errors in parsing the output. this patch adds the
parent step id to ste stepID field.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Made env interpolated instead of evaluated.
* [skip ci] Add Test Workflow file
* Activate Test
* fix Test
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
* feat(#1161): add --through-action to assigned actions from GitHub
* docs(flags): add --through-action and --through-action-token flags description
* test(action, remote): add test case for ThroughAction
* refactor(command): rename command from --through-action to --actions-from-github
* refactor(command): rename command from --actions-from-github to --replace-ghe-action-with-github-com
Do not initialize inputs a second time (in pre and main step).
When the action setup already run during pre step, we must not
re-run it during the main step, otherwise the inputs will be
overwritten by possible other action inputs.
* feat: use logger from context wherever possible
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add step/job id and results to json logs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: value to be masked should not be hard-coded in the action
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: replace values following ::add-mask:: in evaluated strings
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: [DEBUG] identifier for debug logs to distinguish them
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: replace logger with step logger
The container gets injected a job logger, but during the time that steps
are run, we want to use the step logger.
This commit wraps pre/main/post steps in an executor that replaces the
job logger with a step logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add pre/post stage identifier fields to json log output
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add job/step result status to skipped steps/jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: skip local actions pre step in any case
We should skip local actions pre step, as it is not supported by github.
In turn we may need to late prepare remote actions which are run
as steps in a local composite action.
Fixes#1193
* test: remove obsolete test case
Since local actions does not run any pre-step anymore we don't test this case.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
There might be use cases where users want to use GitHub's variables in
the environment variables, which is a valid use case.
This commits adds support for replacement of GitHub's env with GitHub's
values.
Signed-off-by: André Martins <aanm90@gmail.com>
* Update step_action_local.go
* Enable Tests for DRYRUN
* Update runner_test.go
* Update runner_test.go
* Move DRYRUN Test in it's own function
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: handle context cancelation during docker exec
To allow interrupting docker exec (which could be long running)
we process the log output in a go routine and handle
context cancelation as well as command result.
In case of context cancelation a CTRL+C is written into the docker
container. This should be enough to terminate the running
command.
To make sure we do not get stuck during cleanup, we do
set the cleanup contexts with a timeout of 5 minutes
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
* feat: handle SIGTERM signal and abort run
* test: on context cancel, abort running command
This test makes sure that whenever the act Context was canceled, the
currently running docker exec is sent a 0x03 (ctrl+c).
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* test: make sure the exec funcction handles command exit code
This test makes sure that the exec function does handle
docker command error results
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* feat: add post step to actions and add state command
This commit includes requried changes for running post steps
for local and remote actions.
This allows general cleanup work to be done after executing
an action.
Communication is allowed between this steps, by using the
action state.
* feat: collect pre and post steps for composite actions
* refactor: move composite action logic into own file
* refactor: restructure composite handling
* feat: run composite post steps during post step lifecycle
* refactor: remove duplicate log output
* feat: run all composite post actions in a step
Since composite actions could have multiple pre/post steps inside,
we need to run all of them in a single top-level pre/post step.
This PR includes a test case for this and the correct order of steps
to be executed.
* refactor: remove unused lines of code
* refactor: simplify test expression
* fix: use composite job logger
* fix: make step output more readable
* fix: enforce running all post executor
To make sure every post executor/step is executed, it is chained
with it's own Finally executor.
* fix: do not run post step if no step result is available
Having no step result means we do not run any step (neither pre
nor main) and we do not need to run post.
* fix: setup defaults
If no pre-if or post-if is given, it should default to 'always()'.
This could be set even if there is no pre or post step.
In fact this is required for composite actions and included post
steps to run.
* fix: output step related if expression
* test: update expectation
* feat: run pre step from actions (#1110)
This PR implements running pre steps for remote actions.
This includes remote actions using inside local composite actions.
* fix: set correct expr default status checks
For post-if conditions the default status check should be
always(), while for all other if expression the default status
check is success()
References:
https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functionshttps://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if
* fix: remove code added during rebase
* refactor: remove composite action runcontext workaround
The RunContext is cloned to execute a composite action with all its
steps in a similar context. This required some workaround, since
the command handler has kept a reference to the original RunContext.
This is solved now, by replacing the docker LogWriter with a proper
scoped LogWriter.
This prepares for a simpler setup of composite actions to be able
to create and re-create the composite RunContext for pre/main/post
action steps.
* test: check env-vars for local js and docker actions
* test: test remote docker and js actions
* fix: merge github context into env when read and setup
* refacotr: simplify composite context setup
* test: use a map matcher to test input setup
* fix: restore composite log output
Since we create a new line writer, we need to log the raw_output as well.
Otherwise no output will be available from the log-writer
* fix: add RunContext JobName to fill GITHUB_JOBNAME
* test: use nektos/act-test-actions
* fix: allow masking values in composite actions
To allow masking of values from composite actions, we need
to use a custom job logger with a reference to the masked
values for the composite run context.
* refactor: keep existing logger for composite actions
To not introduce another new logger while still be able to use
the masking from the composite action, we add the masks to
the go context. To leverage that context, we also add the context
to the log entries where the valueMasker then could get the actual
mask values.
With this way to 'inject' the masked values into the logger, we do
- keep the logger
- keep the coloring
- stay away from inconsistencies due to parallel jobs
* fix: re-add removed color increase
This one should have never removed :-)
* fix: add missing ExtraPath attribute
* fix: merge run context env into composite run context env
This adds a test and fix for the parent environment. It should be
inherited by the composite environment.
* test: add missing test case
* fix: store github token next to secrets
We must not expose the secrets to composite actions, but the
`github.token` is available inside composite actions.
To provide this we store the token in the config and create it in
the GithubContext from there.
The token can be used with `github.token` but is not available as
`secrets.GITHUB_TOKEN`.
This implements the same behavior as on GitHub.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
* fixup! fix: allow masking values in composite actions
* style: use tabs instead of spaces to fix linter errors
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
To make the test logs more readable, we should fold the
output per test into a group.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This prevented JetBrains GoLand from recognising subtests and treated
it all as single big test, VSCode seems to be still broken in that regard
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Casey Lee <cplee@nektos.com>
Prevents random failing of all other runs when qemu binfmt
is not set up
Signed-off-by: Ryan <me@hackerc.at>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* don't merge env var if it exists already
* remove test workflow
* add some tests
* change mergeMaps order instead of checking for existence
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This change reduces the interfaces by removing
obsolete parameters from functions.
Obsolete parameters does not means unused ones, but
parameters which could be retrieved from other parameters
instead.
This should simplify logic and maintainability for these
functions.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
