* throw if `uses` is invalid
* update JobType to return error
* lint
* put //nolint:dupl on wrong test
* update error message to remove end punctuation
* lint
* update remote job type check
* move if statement
* rm nolint:dupl ... we'll see how that goes
---------
Co-authored-by: Casey Lee <cplee@nektos.com>
Adds an explicit config option to specify the directory
below which action contents will be cached. If left empty
the previous location at `$XDG_CACHE_HOME/act` or
`$HOME/.cache/act` will be used respectively.
Required to resolvegitea/act_runner#235
Co-authored-by: Marius Zwicker <marius@mlba-team.de>
Reviewed-on: https://gitea.com/gitea/act/pulls/65
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Marius Zwicker <emzeat@noreply.gitea.com>
Co-committed-by: Marius Zwicker <emzeat@noreply.gitea.com>
Adds an option to specify the directory below which actions
and host workspaces will be stored. If left empty the previous
location at $XDG_CACHE_HOME/act or $HOME/.cache/act will be used
respectively.
Co-authored-by: Casey Lee <cplee@nektos.com>
Because the upstream [PR](https://github.com/nektos/act/pull/1833) already supports variables, so this PR revert #43 (commit de529139af), and cherry-pick commit [6ce45e3](6ce45e3f24).
Co-authored-by: Kuan Yong <wong0514@gmail.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/66
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
* feature: Add support for github action variables
* add --var flag for github variables
* unitests: Updated unittests to cover vars context.
* Remove syntax extension for vars and correct unit tests
* Update pkg/runner/expression.go
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
---------
Co-authored-by: kuanyong-wong-partior <kuanyong.wong@partior.com>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
* Log incoming jobs.
Log the full contents of the job protobuf to make debugging jobs easier
* Ensure that the parallel executor always uses at least one thread.
The caller may mis-calculate the number of CPUs as zero, in which case
ensure that at least one thread is spawned.
* Use runtime.NumCPU for CPU counts.
For hosts without docker, GetHostInfo() returns a blank struct which
has zero CPUs and causes downstream trouble.
---------
Co-authored-by: Paul Armstrong <psa@users.noreply.gitea.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Follow: https://gitea.com/gitea/act_runner/pulls/184
Close https://gitea.com/gitea/act_runner/issues/177
#### changes:
- `act` create new networks only if the value of `NeedCreateNetwork` is true, and remove these networks at last. `NeedCreateNetwork` is passed by `act_runner`. 'NeedCreateNetwork' is true only if `container.network` in the configuration file of the `act_runner` is empty.
- In the `docker create` phase, specify the network to which containers will connect. Because, if not specify , container will connect to `bridge` network which is created automatically by Docker.
- If the network is user defined network ( the value of `container.network` is empty or `<custom-network>`. Because, the network created by `act` is also user defined network.), will also specify alias by `--network-alias`. The alias of service is `<service-id>`. So we can be access service container by `<service-id>:<port>` in the steps of job.
- Won't try to `docker network connect ` network after `docker start` any more.
- Because on the one hand, `docker network connect` applies only to user defined networks, if try to `docker network connect host <container-name>` will return error.
- On the other hand, we just specify network in the stage of `docker create`, the same effect can be achieved.
- Won't try to remove containers and networks berfore the stage of `docker start`, because the name of these containers and netwoks won't be repeat.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/56
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
related to: https://gitea.com/gitea/act_runner/issues/127
This PR make `act` support the expression like `${{ vars.YOUR_CUSTOM_VARIABLES }}`.
Reviewed-on: https://gitea.com/gitea/act/pulls/43
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
Partially fixes https://gitea.com/gitea/act_runner/issues/91
If the repository is private, we need to provide the token to the caller workflows to access the called reusable workflows from the same repository.
Reviewed-on: https://gitea.com/gitea/act/pulls/38
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Prior to this change, the artifact server always binds to the detected
"outbound IP", breaks functionality when that IP is unroutable.
For example, Zscaler assigns the host a local CGNAT address,
100.64.0.1, which is unreachable from Docker Desktop.
* Add the `--artifact-server-addr` flag to allow override of the address
to which the artifact server binds, defaulting to the existing
behaviour.
Fixes: #1559
* added input flags
* added input as part of the action event and added test cases
* updated readme
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
* feat: allow to spawn and run a local reusable workflow
This change contains the ability to parse/plan/run a local
reusable workflow.
There are still numerous things missing:
- inputs
- secrets
- outputs
* feat: add workflow_call inputs
* test: improve inputs test
* feat: add input defaults
* feat: allow expressions in inputs
* feat: use context specific expression evaluator
* refactor: prepare for better re-usability
* feat: add secrets for reusable workflows
* test: use secrets during test run
* feat: handle reusable workflow outputs
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: move autoremove into the jobexecutor
breaking: docker container are removed after job exit
* reduce complexity
* remove linter exception
* reduce cyclic complexity
* fix: always allow 1 min for stopping and removing the runner, even if we were cancelled
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
[1]: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
For log processing of the JSON logs, we want to be able to know which
keys/values of the matrices were used.
This commit adds the current matrix map to the job logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* Made env interpolated instead of evaluated.
* [skip ci] Add Test Workflow file
* Activate Test
* fix Test
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
* feat(#1161): add --through-action to assigned actions from GitHub
* docs(flags): add --through-action and --through-action-token flags description
* test(action, remote): add test case for ThroughAction
* refactor(command): rename command from --through-action to --actions-from-github
* refactor(command): rename command from --actions-from-github to --replace-ghe-action-with-github-com
* feat: use logger from context wherever possible
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add step/job id and results to json logs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: value to be masked should not be hard-coded in the action
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: replace values following ::add-mask:: in evaluated strings
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: [DEBUG] identifier for debug logs to distinguish them
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: replace logger with step logger
The container gets injected a job logger, but during the time that steps
are run, we want to use the step logger.
This commit wraps pre/main/post steps in an executor that replaces the
job logger with a step logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add pre/post stage identifier fields to json log output
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add job/step result status to skipped steps/jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
There might be use cases where users want to use GitHub's variables in
the environment variables, which is a valid use case.
This commits adds support for replacement of GitHub's env with GitHub's
values.
Signed-off-by: André Martins <aanm90@gmail.com>
* feat: handle context cancelation during docker exec
To allow interrupting docker exec (which could be long running)
we process the log output in a go routine and handle
context cancelation as well as command result.
In case of context cancelation a CTRL+C is written into the docker
container. This should be enough to terminate the running
command.
To make sure we do not get stuck during cleanup, we do
set the cleanup contexts with a timeout of 5 minutes
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
* feat: handle SIGTERM signal and abort run
* test: on context cancel, abort running command
This test makes sure that whenever the act Context was canceled, the
currently running docker exec is sent a 0x03 (ctrl+c).
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* test: make sure the exec funcction handles command exit code
This test makes sure that the exec function does handle
docker command error results
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* refactor: remove composite action runcontext workaround
The RunContext is cloned to execute a composite action with all its
steps in a similar context. This required some workaround, since
the command handler has kept a reference to the original RunContext.
This is solved now, by replacing the docker LogWriter with a proper
scoped LogWriter.
This prepares for a simpler setup of composite actions to be able
to create and re-create the composite RunContext for pre/main/post
action steps.
* test: check env-vars for local js and docker actions
* test: test remote docker and js actions
* fix: merge github context into env when read and setup
* refacotr: simplify composite context setup
* test: use a map matcher to test input setup
* fix: restore composite log output
Since we create a new line writer, we need to log the raw_output as well.
Otherwise no output will be available from the log-writer
* fix: add RunContext JobName to fill GITHUB_JOBNAME
* test: use nektos/act-test-actions
* fix: allow masking values in composite actions
To allow masking of values from composite actions, we need
to use a custom job logger with a reference to the masked
values for the composite run context.
* refactor: keep existing logger for composite actions
To not introduce another new logger while still be able to use
the masking from the composite action, we add the masks to
the go context. To leverage that context, we also add the context
to the log entries where the valueMasker then could get the actual
mask values.
With this way to 'inject' the masked values into the logger, we do
- keep the logger
- keep the coloring
- stay away from inconsistencies due to parallel jobs
* fix: re-add removed color increase
This one should have never removed :-)
* fix: add missing ExtraPath attribute
* fix: merge run context env into composite run context env
This adds a test and fix for the parent environment. It should be
inherited by the composite environment.
* test: add missing test case
* fix: store github token next to secrets
We must not expose the secrets to composite actions, but the
`github.token` is available inside composite actions.
To provide this we store the token in the config and create it in
the GithubContext from there.
The token can be used with `github.token` but is not available as
`secrets.GITHUB_TOKEN`.
This implements the same behavior as on GitHub.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
* fixup! fix: allow masking values in composite actions
* style: use tabs instead of spaces to fix linter errors
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
act has a feature that skips the checkout action to do a remote
checkout when a local checkout exists. in some cases, e.g. when
running act in a CI, you always want to clone the repository.
* feat: add json logger output
This will allow to format log output as json.
This is helpful in cases where act is not executed on a 'local' machine.
* refactor: use runner config
Using the runner config to configure logging is cleaner.
Co-authored-by: Casey Lee <cplee@nektos.com>
this commit adds support for the `::add-mask::` command, which was
implemented as a stub before.
it does not cover debug output that appears when you run act in
verbose mode
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: run jobs in parallel
This changes fixes and restructures the parallel execution of jobs.
The previous changes limiting the parallel execution did break this
and allowed only one job in parallel.
While we run #CPU jobs in parallel now, the jobs added per job-matrix
add to this. So we might over-commit to the capacity, but at least
it is limited.
* fix: correctly build job pipeline
The job pipeline should just append all required pipeline steps.
The parallelism will be handled by the ParallelExecutor and we
shouldn't handle it during building the pipelines.
Also this adds a test, that the ParallelExecutor does run
a limited amount of parallel goroutines.
* test: correct test implementation
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
