* Support services (#42)
Removed createSimpleContainerName and AutoRemove flag
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/42
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Support services options (#45)
Reviewed-on: https://gitea.com/gitea/act/pulls/45
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Support intepolation for `env` of `services` (#47)
Reviewed-on: https://gitea.com/gitea/act/pulls/47
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Support services `credentials` (#51)
If a service's image is from a container registry requires authentication, `act_runner` will need `credentials` to pull the image, see [documentation](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idservicesservice_idcredentials).
Currently, `act_runner` incorrectly uses the `credentials` of `containers` to pull services' images and the `credentials` of services won't be used, see the related code: 0c1f2edb99/pkg/runner/run_context.go (L228-L269)
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/51
Reviewed-by: Jason Song <i@wolfogre.com>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Add ContainerMaxLifetime and ContainerNetworkMode options
from: b9c20dcaa4
* Fix container network issue (#56)
Follow: https://gitea.com/gitea/act_runner/pulls/184
Close https://gitea.com/gitea/act_runner/issues/177
- `act` create new networks only if the value of `NeedCreateNetwork` is true, and remove these networks at last. `NeedCreateNetwork` is passed by `act_runner`. 'NeedCreateNetwork' is true only if `container.network` in the configuration file of the `act_runner` is empty.
- In the `docker create` phase, specify the network to which containers will connect. Because, if not specify , container will connect to `bridge` network which is created automatically by Docker.
- If the network is user defined network ( the value of `container.network` is empty or `<custom-network>`. Because, the network created by `act` is also user defined network.), will also specify alias by `--network-alias`. The alias of service is `<service-id>`. So we can be access service container by `<service-id>:<port>` in the steps of job.
- Won't try to `docker network connect ` network after `docker start` any more.
- Because on the one hand, `docker network connect` applies only to user defined networks, if try to `docker network connect host <container-name>` will return error.
- On the other hand, we just specify network in the stage of `docker create`, the same effect can be achieved.
- Won't try to remove containers and networks berfore the stage of `docker start`, because the name of these containers and netwoks won't be repeat.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/56
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
* Check volumes (#60)
This PR adds a `ValidVolumes` config. Users can specify the volumes (including bind mounts) that can be mounted to containers by this config.
Options related to volumes:
- [jobs.<job_id>.container.volumes](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idcontainervolumes)
- [jobs.<job_id>.services.<service_id>.volumes](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idservicesservice_idvolumes)
In addition, volumes specified by `options` will also be checked.
Currently, the following default volumes (see a72822b3f8/pkg/runner/run_context.go (L116-L166)) will be added to `ValidVolumes`:
- `act-toolcache`
- `<container-name>` and `<container-name>-env`
- `/var/run/docker.sock` (We need to add a new configuration to control whether the docker daemon can be mounted)
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/60
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Remove ContainerMaxLifetime; fix lint
* Remove unused ValidVolumes
* Remove ConnectToNetwork
* Add docker stubs
* Close docker clients to prevent file descriptor leaks
* Fix the error when removing network in self-hosted mode (#69)
Fixes https://gitea.com/gitea/act_runner/issues/255
Reviewed-on: https://gitea.com/gitea/act/pulls/69
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* Move service container and network cleanup to rc.cleanUpJobContainer
* Add --network flag; default to host if not using service containers or set explicitly
* Correctly close executor to prevent fd leak
* Revert to tail instead of full path
* fix network duplication
* backport networkingConfig for aliaes
* don't hardcode netMode host
* Convert services test to table driven tests
* Add failing tests for services
* Expose service container ports onto the host
* Set container network mode in artifacts server test to host mode
* Log container network mode when creating/starting a container
* fix: Correctly handle ContainerNetworkMode
* fix: missing service container network
* Always remove service containers
Although we usually keep containers running if the workflow errored
(unless `--rm` is given) in order to facilitate debugging and we have
a flag (`--reuse`) to always keep containers running in order to speed
up repeated `act` invocations, I believe that these should only apply
to job containers and not service containers, because changing the
network settings on a service container requires re-creating it anyway.
* Remove networks only if no active endpoints exist
* Ensure job containers are stopped before starting a new job
* fix: go build -tags WITHOUT_DOCKER
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Co-authored-by: ZauberNerd <zaubernerd@zaubernerd.de>
Follow: https://gitea.com/gitea/act_runner/pulls/184
Close https://gitea.com/gitea/act_runner/issues/177
#### changes:
- `act` create new networks only if the value of `NeedCreateNetwork` is true, and remove these networks at last. `NeedCreateNetwork` is passed by `act_runner`. 'NeedCreateNetwork' is true only if `container.network` in the configuration file of the `act_runner` is empty.
- In the `docker create` phase, specify the network to which containers will connect. Because, if not specify , container will connect to `bridge` network which is created automatically by Docker.
- If the network is user defined network ( the value of `container.network` is empty or `<custom-network>`. Because, the network created by `act` is also user defined network.), will also specify alias by `--network-alias`. The alias of service is `<service-id>`. So we can be access service container by `<service-id>:<port>` in the steps of job.
- Won't try to `docker network connect ` network after `docker start` any more.
- Because on the one hand, `docker network connect` applies only to user defined networks, if try to `docker network connect host <container-name>` will return error.
- On the other hand, we just specify network in the stage of `docker create`, the same effect can be achieved.
- Won't try to remove containers and networks berfore the stage of `docker start`, because the name of these containers and netwoks won't be repeat.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act/pulls/56
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
Fix [#24039(GitHub)](https://github.com/go-gitea/gitea/issues/24039)
At present, if a job fails in the `Set up job`, the result status of the job will still be `success`. The reason is that the `pre` steps don't call `SetJobError`, so the `jobError` will be nil when `post` steps setting the job result. See 5c4a96bcb7/pkg/runner/job_executor.go (L99)
Reviewed-on: https://gitea.com/gitea/act/pulls/40
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
* fix: map job output for reusable workflows
This fixes the job outputs for reusable workflows. There is
a required indirection. Before this we took the outputs from
all jobs which is not what users express with the workflow
outputs.
* fix: remove double evaluation
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: preserve job result state in case of failure
There is just one job field for the job result. This is also true for
matrix jobs. We need to preserve the failure state of a job to
have the whole job failing in case of one permuation of the matrix failed.
Closes#1518
* test: remove continue-on-error on job level
This feature is not yet supported by act and if implemented
would make this test invalid
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: allow to spawn and run a local reusable workflow
This change contains the ability to parse/plan/run a local
reusable workflow.
There are still numerous things missing:
- inputs
- secrets
- outputs
* feat: add workflow_call inputs
* test: improve inputs test
* feat: add input defaults
* feat: allow expressions in inputs
* feat: use context specific expression evaluator
* refactor: prepare for better re-usability
* feat: add secrets for reusable workflows
* test: use secrets during test run
* feat: handle reusable workflow outputs
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: move autoremove into the jobexecutor
breaking: docker container are removed after job exit
* reduce complexity
* remove linter exception
* reduce cyclic complexity
* fix: always allow 1 min for stopping and removing the runner, even if we were cancelled
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: interpolate the step names
Step names could contain expressions refering to event data.
Fixes#1353
* test: add missing mock data
* fix: setup composite expression evaluator
The RunContext does contain a cached ExpressionEvaluator.
This should be the case the composite RunContext as well.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Casey Lee <cplee@nektos.com>
* feat: use logger from context wherever possible
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add step/job id and results to json logs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: value to be masked should not be hard-coded in the action
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: replace values following ::add-mask:: in evaluated strings
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: [DEBUG] identifier for debug logs to distinguish them
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: replace logger with step logger
The container gets injected a job logger, but during the time that steps
are run, we want to use the step logger.
This commit wraps pre/main/post steps in an executor that replaces the
job logger with a step logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add pre/post stage identifier fields to json log output
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add job/step result status to skipped steps/jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: handle context cancelation during docker exec
To allow interrupting docker exec (which could be long running)
we process the log output in a go routine and handle
context cancelation as well as command result.
In case of context cancelation a CTRL+C is written into the docker
container. This should be enough to terminate the running
command.
To make sure we do not get stuck during cleanup, we do
set the cleanup contexts with a timeout of 5 minutes
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
* feat: handle SIGTERM signal and abort run
* test: on context cancel, abort running command
This test makes sure that whenever the act Context was canceled, the
currently running docker exec is sent a 0x03 (ctrl+c).
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* test: make sure the exec funcction handles command exit code
This test makes sure that the exec function does handle
docker command error results
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* feat: add post step to actions and add state command
This commit includes requried changes for running post steps
for local and remote actions.
This allows general cleanup work to be done after executing
an action.
Communication is allowed between this steps, by using the
action state.
* feat: collect pre and post steps for composite actions
* refactor: move composite action logic into own file
* refactor: restructure composite handling
* feat: run composite post steps during post step lifecycle
* refactor: remove duplicate log output
* feat: run all composite post actions in a step
Since composite actions could have multiple pre/post steps inside,
we need to run all of them in a single top-level pre/post step.
This PR includes a test case for this and the correct order of steps
to be executed.
* refactor: remove unused lines of code
* refactor: simplify test expression
* fix: use composite job logger
* fix: make step output more readable
* fix: enforce running all post executor
To make sure every post executor/step is executed, it is chained
with it's own Finally executor.
* fix: do not run post step if no step result is available
Having no step result means we do not run any step (neither pre
nor main) and we do not need to run post.
* fix: setup defaults
If no pre-if or post-if is given, it should default to 'always()'.
This could be set even if there is no pre or post step.
In fact this is required for composite actions and included post
steps to run.
* fix: output step related if expression
* test: update expectation
* feat: run pre step from actions (#1110)
This PR implements running pre steps for remote actions.
This includes remote actions using inside local composite actions.
* fix: set correct expr default status checks
For post-if conditions the default status check should be
always(), while for all other if expression the default status
check is success()
References:
https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functionshttps://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if
* fix: remove code added during rebase
* refactor: split step_context into separate files
This commit moves functions from the step_context.go file into different
files, but does otherwise not change anything.
This is done to make it easier to review the changes made to these
functions in the next commit, where we introduce a step factory to
facilitate better unit testing of steps.
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
* refactor: introduce step factory and make steps testable
With this commit we're introducing the `stepFactory` and interfaces
and implementations for each different kind of step (run, docker,
local and remote actions).
Separating each step kind into its own interface and implementation
makes it easier to reason about and to change behaviour of the step.
By introducing interfaces we enable better unit testability as now
each step implementation, the step factory and the job executor can
be tested on their own by mocking out parts that are irrelevant.
This commits prepares us for implementing pre/post actions in a
later PR.
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
* fix: run post steps in reverse order
* test: add missing asserts for mocks
* refactor: use local reference instead of function
This may make code more easy to follow.
* refactor: correct typo in function name
* test: use named structs
* test: only expected valid calls
There are mocks which are only called on certain conditions.
* refactor: use step-model to get step name
Using the step-logger we have to get the logger name from the
step model.
* test: only mock stopContainer if required
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
* feat: add step name to logger field
This change does add the step name to the logger fields. This does
not change the output for our users, but for the json logger, it
does make each step output traceable.
* fix: remove new logger
Since logrus and context both are immutable for our case, we
can just add a new field and store the logger in the context.
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
This splits the executor from the RunContext into its own function
called newJobExecutor.
We defined an interface called jobInfo which is implemented by the RunContext.
This enables better unit testing because only a small interface needs to
be mocked.
This is a preparation for implementing pre and post actions.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
