* test: check workflow_dispatch inputs
This implements a test to check for `workflow_dispatch` inputs.
This will be a prerequisite for implementing the inputs.
* feat: map workflow_dispatch input to expression evaluator
This changes adds the workflow_dispatch event inputs
to the `inputs` context and maintaining the boolean type
* fix: coerce boolean input types
* fix: use step env if available, rc env otherwise
* test: add test for networking setup in act
This test makes sure that the hostname inside of act is resolvable.
* fix: only merge existing container options
When merging parsed container options without options being
set in a job, the default docker options are returned and
will override the expected defaults by act (e.g. network mode).
This is a first attempt to mitigate this behavior and only
merge settings if something was requested on a job.
* refactor: split config merging into own function
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This fixes an issue in the chain of post steps introduced
while updating the step-logger for composite actions.
It includes a test case so we make sure this does not happen
again.
* Made env interpolated instead of evaluated.
* [skip ci] Add Test Workflow file
* Activate Test
* fix Test
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
* feat: use logger from context wherever possible
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add step/job id and results to json logs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: value to be masked should not be hard-coded in the action
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: replace values following ::add-mask:: in evaluated strings
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: [DEBUG] identifier for debug logs to distinguish them
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: replace logger with step logger
The container gets injected a job logger, but during the time that steps
are run, we want to use the step logger.
This commit wraps pre/main/post steps in an executor that replaces the
job logger with a step logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add pre/post stage identifier fields to json log output
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add job/step result status to skipped steps/jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
There might be use cases where users want to use GitHub's variables in
the environment variables, which is a valid use case.
This commits adds support for replacement of GitHub's env with GitHub's
values.
Signed-off-by: André Martins <aanm90@gmail.com>
* Update step_action_local.go
* Enable Tests for DRYRUN
* Update runner_test.go
* Update runner_test.go
* Move DRYRUN Test in it's own function
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: add post step to actions and add state command
This commit includes requried changes for running post steps
for local and remote actions.
This allows general cleanup work to be done after executing
an action.
Communication is allowed between this steps, by using the
action state.
* feat: collect pre and post steps for composite actions
* refactor: move composite action logic into own file
* refactor: restructure composite handling
* feat: run composite post steps during post step lifecycle
* refactor: remove duplicate log output
* feat: run all composite post actions in a step
Since composite actions could have multiple pre/post steps inside,
we need to run all of them in a single top-level pre/post step.
This PR includes a test case for this and the correct order of steps
to be executed.
* refactor: remove unused lines of code
* refactor: simplify test expression
* fix: use composite job logger
* fix: make step output more readable
* fix: enforce running all post executor
To make sure every post executor/step is executed, it is chained
with it's own Finally executor.
* fix: do not run post step if no step result is available
Having no step result means we do not run any step (neither pre
nor main) and we do not need to run post.
* fix: setup defaults
If no pre-if or post-if is given, it should default to 'always()'.
This could be set even if there is no pre or post step.
In fact this is required for composite actions and included post
steps to run.
* fix: output step related if expression
* test: update expectation
* feat: run pre step from actions (#1110)
This PR implements running pre steps for remote actions.
This includes remote actions using inside local composite actions.
* fix: set correct expr default status checks
For post-if conditions the default status check should be
always(), while for all other if expression the default status
check is success()
References:
https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functionshttps://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if
* fix: remove code added during rebase
* refactor: remove composite action runcontext workaround
The RunContext is cloned to execute a composite action with all its
steps in a similar context. This required some workaround, since
the command handler has kept a reference to the original RunContext.
This is solved now, by replacing the docker LogWriter with a proper
scoped LogWriter.
This prepares for a simpler setup of composite actions to be able
to create and re-create the composite RunContext for pre/main/post
action steps.
* test: check env-vars for local js and docker actions
* test: test remote docker and js actions
* fix: merge github context into env when read and setup
* refacotr: simplify composite context setup
* test: use a map matcher to test input setup
* fix: restore composite log output
Since we create a new line writer, we need to log the raw_output as well.
Otherwise no output will be available from the log-writer
* fix: add RunContext JobName to fill GITHUB_JOBNAME
* test: use nektos/act-test-actions
* fix: allow masking values in composite actions
To allow masking of values from composite actions, we need
to use a custom job logger with a reference to the masked
values for the composite run context.
* refactor: keep existing logger for composite actions
To not introduce another new logger while still be able to use
the masking from the composite action, we add the masks to
the go context. To leverage that context, we also add the context
to the log entries where the valueMasker then could get the actual
mask values.
With this way to 'inject' the masked values into the logger, we do
- keep the logger
- keep the coloring
- stay away from inconsistencies due to parallel jobs
* fix: re-add removed color increase
This one should have never removed :-)
* fix: add missing ExtraPath attribute
* fix: merge run context env into composite run context env
This adds a test and fix for the parent environment. It should be
inherited by the composite environment.
* test: add missing test case
* fix: store github token next to secrets
We must not expose the secrets to composite actions, but the
`github.token` is available inside composite actions.
To provide this we store the token in the config and create it in
the GithubContext from there.
The token can be used with `github.token` but is not available as
`secrets.GITHUB_TOKEN`.
This implements the same behavior as on GitHub.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
* fixup! fix: allow masking values in composite actions
* style: use tabs instead of spaces to fix linter errors
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
To make the test logs more readable, we should fold the
output per test into a group.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This prevented JetBrains GoLand from recognising subtests and treated
it all as single big test, VSCode seems to be still broken in that regard
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Casey Lee <cplee@nektos.com>
Prevents random failing of all other runs when qemu binfmt
is not set up
Signed-off-by: Ryan <me@hackerc.at>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Feature: uses in composite
* Negate logic
* Reduce complexity
* Update step_context.go
* Update step_context.go
* Update step_context.go
* Fix syntax error in test
* Bump
* Disable usage of actions/setup-node@v2
* Bump
* Fix step id collision
* Fix output command workaround
* Make secrets context inaccessible in composite
* Fix order after adding a workaround (needs tests)
Fixes https://github.com/nektos/act/pull/793#issuecomment-922329838
* Evaluate env before passing one step deeper
If env would contain any inputs, steps ctx or secrets there was undefined behaviour
* [no ci] prepare secret test
* Initial test pass inputs as env
* Fix syntax error
* extend test also for direct invoke
* Fix passing provided env as composite output
* Fix syntax error
* toUpper 'no such secret', act has a bug
* fix indent
* Fix env outputs in composite
* Test env outputs of composite
* Fix inputs not defined in docker actions
* Fix interpolate args input of docker actions
* Fix lint
* AllowCompositeIf now defaults to true
see https://github.com/actions/runner/releases/tag/v2.284.0
* Fix lint
* Fix env of docker action.yml
* Test calling a local docker action from composite
With input context hirachy
* local-action-dockerfile Test pass on action/runner
It seems action/runner ignores overrides of args,
if the target docker action has the args property set.
* Fix exec permissions of docker-local-noargs
* Revert getStepsContext change
* fix: handle composite action on error and continue
This change is a follow up of https://github.com/nektos/act/pull/840
and integrates with https://github.com/nektos/act/pull/793
There are two things included here:
- The default value for a step.if in an action need to be 'success()'
- We need to hand the error from a composite action back to the
calling executor
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
* Patch inputs can be bool, float64 and string
for workflow_call
Also inputs is now always defined, but may be null
* Simplify cherry-picked commit
* Minor style adjustments
* Remove chmod +x from tests
now fails on windows like before
* Fix GITHUB_ACTION_PATH some action env vars
Fixes GITHUB_ACTION_REPOSITORY, GITHUB_ACTION_REF.
* Add comment to CompositeRestrictions
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Ryan <me@hackerc.at>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: rework `setupShellCommand`
* move all logic to separate function so we can test that later
* split `step.Shell` and `step.WorkingDirectory` setup into own funcs
* general cleanup of function
* use `ActPath` to not collide with checked out repository
* use `shellquote.Split()` instead of `strings.Fields()` for better command split
* replace single string concat with `fmt`
Signed-off-by: hackercat <me@hackerc.at>
* lint(editorconfig): ignore *_test.go due to mixed style
Signed-off-by: hackercat <me@hackerc.at>
* fix: continue jobs + steps after failure
To allow proper if expression handling on jobs and steps (like always,
success, failure, ...) we need to continue running all executors in
the prepared chain.
To keep the error handling intact we add an occurred error to the
go context and handle it later in the pipeline/chain.
Also we add the job result to the needs context to give expressions
access to it.
The needs object, failure and success functions are split between
run context (on jobs) and step context.
Closes#442
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* style: correct linter warnings
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* fix: job if value defaults to success()
As described in the documentation, a default value of "success()" is
applied when no "if" value is present on the job.
https://docs.github.com/en/actions/learn-github-actions/expressions#job-status-check-functions
Co-authored-by: Markus Wolf <mail@markus-wolf.de>
* fix: check job needs recursively
Ensure job result includes results of previous jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: add runner test for job status check functions
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: add unit tests for run context if evaluation
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* refactor: move if expression evaluation
Move if expression evaluation into own function (step context) to
better support unit testing.
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* test: add unit tests for step context if evaluation
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: handle job error more resilient
The job error is not stored in a context map instead of a context
added value.
Since context values are immutable an added value requires to keep
the new context in all cases. This is fragile since it might slip
unnoticed to other parts of the code.
Storing the error of a job in the context map will make it more stable,
since the map is always there and the context of the pipeline is stable
for the whole run.
* feat: steps should use a default if expression of success()
* test: add integration test for if-expressions
* chore: disable editorconfig-checker for yaml multiline string
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
* Don't interpolate joboutputs, before job is donei
All credits go to @ChristopherHX which fixed this issue.
I only created a PR for this so it will be fixed in the upstream binary.
This fixes#758
* Added output test
* Fix typo
* ci(golangci-lint): switch to latest
remove schema override since it was fixed in upstream
Signed-off-by: hackercat <me@hackerc.at>
* fix: apply lint fixes
* fix: set default shell for containers to sh
This matches GitHub Actions behaviour where,
runners use bash since it's guaranteed to exist there
while containers use sh for compatibility
* tests: fixup for default shell
* fix[workflow]: multiple fixes for workflow/matrix
fix[workflow]: default `max-parallel`
fix[workflow]: default `fail-fast`, it's `true`, not `false`
fix[workflow]: skipping over the job when `strategy:` is defined but `matrix:` isn't (fixes#625)
fix[workflow]: skip non-existing includes keys and hard fail on non-existing excludes keys
fix[workflow]: simplify Matrix decode (because I "think" I know how `yaml` works) (fixes#760)
fix[tests]: add test for planner and runner
* fix(workflow): use yaml node for env key
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: typo
* fix: remove debug for git references
it generates a massive amount of logs
* feat: read values from env
allows to test act on GHA when it's not a main repo
* fix: merge extrapath with PATH
* fix(tests): add additional shells for testing
* fix(image): update images
pin node to major version only, current node version: 12.22.1
replace most images with `node:12-buster-slim` to prevent
errors on macOS runner due to DockerHub pull limit
replace ocaml image
Co-authored-by: Casey Lee <cplee@nektos.com>
* refactor: remove `gotest.tools`
* remove all references to `gotest.tools` and replace it with
`github.com/stretchr/testify` which was originally used for tests
* bump `golangci-lint` version
* add `depguard` and `importas` to prevent import of unwanted packages
* add custom schema and information about config since
schemastore.org has broken schema for `golangci-lint` config
* fix: handle more error cases
* Fix: Skip Checkout Regression
* Fix test name
* Add newline to end of checkout push test
* Restore .gitignore from node12 test. Todo: Restore that file after the test
* Format workflow
* Test: Fix path slash direction for windows relative source path
* Add explicit nil test for newRemoteAction
* Regress .secrets during tests
Co-authored-by: Ryan (hackercat) <me@hackerc.at>
* Regression in the .golangci.yml file
* This looks like an even better fix to #451
The previous solution only prevented the `starting container process caused "exec: \"bash\"`
error when someone added an "extra" path in the workflow using `::add-path`
* Add support for >> $GITHUB_PATH
* The newRunCommand has too high cyclomatic complexity
* Add "linux/arm64" to new test
* The cyclop linter was complaining so I extracted some funcs
* Close some readers
* Fix typo
* fix: add missing composite function
* Fix regress from merging
* Keep the error messages as is
* consolidate with master
* Close the tar reader on defer
* New way to get ContainerWorkdir
* Remove arch from runner test
* Separate the UpdateFromEnv and UpdateFromPath
Co-authored-by: hackercat <me@hackerc.at>
* Potentially solved merge conflict
* Update pkg/model/planner.go
Based on feedback
Co-authored-by: Ryan (hackercat) <me@hackerc.at>
* Fixed compilation error
* added missed test
* Fixed spelling error to work with lint error
Co-authored-by: Ryan (hackercat) <me@hackerc.at>
Co-authored-by: Casey Lee <cplee@nektos.com>
* Add option to specify custom GitHub instance
* Use correct GHE API endpoint URLs
Co-authored-by: Markus Wolf <knister.peter@shadowrun-clan.de>
* Extract slug from GitHub Enterprise URLs
Co-authored-by: Markus Wolf <knister.peter@shadowrun-clan.de>
* Use GITHUB_TOKEN for clone authenticate if provided
This change will allow use authentication for cloning actions
from private repositories or github enterprise instances.
Co-Authored-By: Markus Wolf <knister.peter@shadowrun-clan.de>
* Add section about using act on GitHub Enterprise to README
Co-authored-by: Markus Wolf <knister.peter@shadowrun-clan.de>
* Set GitHubInstance in runnerConfig in runner_test
Co-authored-by: Markus Wolf <knister.peter@shadowrun-clan.de>
Co-authored-by: hackercat <me@hackerc.at>
Co-authored-by: Markus Wolf <knister.peter@shadowrun-clan.de>
* Remove pwsh -login and add Pwsh test
* Add Shell Command Test for coverage
* 🧪 Move PWSH Platform definition to inline test, it can always be expanded out later
Reference: https://github.com/nektos/act/pull/660#discussion_r626171728
* Test MacOS Build for transient failure
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
feat: add flag `--no-recurse` to disable recursion when reading workflows from directories
feat: added more tests to `TestPlanner`, renamed `TestJobFileInfo` to more appropriate name `WorkflowPlanTest`
style: changed error message to lowercase, added single quotes for better visibility
Co-authored-by: Casey Lee <cplee@nektos.com>
- Don't set architecture, let Docker host decide it's own platform,
remove `runtime` dependency and don't show default in `--help`
- Remove most tests, we need to check only once if it works on
different platform
- Rename `DeleteImage` to `RemoveImage` to conform to existing
function in `docker` cli, added options to specify `force` and
`pruneChildren`
* Add support for composite actions
* Fix to make more complex composite actions work
* Fix to make more complex composite actions work
* Let's validate the steps in the composite steps to fail on uses and run's without shell, like the real world
* Add support for composite actions
* Add workflow to test composite actions
* Log instead of panicing when output is mismatched
* Merge maps so environment variables are not lost
* Remove Debug
* Correect merge error
* Remove invalid composite tests.
* Fix composite test
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: monkers <mikem@msquaredconsulting.co.uk>
Co-authored-by: Mike Moncrieffe <69815687+mikemonkers@users.noreply.github.com>
* Add QEMU to run different architectures
* Update dependencies in `go.mod`
* Add `--container-architecture` flag to specify custom image architecture
Co-authored-by: Casey Lee <cplee@nektos.com>
* Upgrade to the official golangci-lint action and fix some issues it found
* Update deps
* Remove a shadow warning
* Initialize the splitPattern only once
* Initial attempt at supporting $GITHUB_ENV
Needs some polishing and tests
* Now it's actually working
* Replace golang.org/x/crypto/ssh/terminal with golang.org/x/term
* Disable the issue-228 test again
* The linter is picky
* Discovered that the workflow/envs.txt had to exist in certain cases
* Fix small linter issue
* fixes include directive of strategy build.
* Adds test for include and exclude in matrix builds.
* ubuntu-16.04 instead of 20.04
* Adds more platforms for runner_test
Prevent most "skipping unsupported platform messages".
* correct printing for unsupported platform
* fix merge
